图片照片三维建模软件PhotoModeler UAS 2017.1.1 Win64安装破解教程
PhotoModeler UAS 2017.1.1 X64
价      格:¥ 0.00
30天售出:128
产品编号 产品ID 储存地址 容量大小
SP0597 98640033690 百度网盘 1G
点击立即购买 点击在线交谈 无需注册会员,可以直接购买!
[VIP及以上会员专用下载地址,普通会员和游客请直接点击购买按钮]
商品详情

图片照片三维建模软件PhotoModeler UAS 2017.1.1 Win64安装破解教程

附:图片照片三维建模软件PhotoModeler UAS 2017.1.1 Win64英文破解版Crack下载地址:
http://www.olodytt.com/ruanjian/_hybgyy/tufanshu-1547112912923.html
 
图片照片三维建模软件PhotoModeler UAS 2017.1.1
安装说明:

1,打开install文件夹,点击PMUAS64Setup.exe安装软件,默认安装,不要更改路径,完成后不要运行,若自动运行了就直接关闭。

2,关闭杀毒软件和防火墙,打开Crack文件夹,右键以管理员身份运行Activation.exe,输入密码: countryboy  提示完成即可。

3,右键以管理员身份运行软件,若打不开,多点几次,依次点击软件Options菜单-----License Management,选择Manual/Offline 选项,输入以下注册信息:

Activation Code  : p810-41736-4416-CS31-YDU7-S7YH-WYA4

Registration Key: 208313265-1247750189-7605536-1113545702

4,点击 Activate注册激活软件,即可完美无限制使用了(注意:不要更新软件,否则无法使用)。

本教程由奇翼资源网(www.olodytt.com)荣誉出品!

Log in as Administrator, Right Click, and select run as Administrator.

Password: countryboy

1. Install PhotoModeler (Folder SETUP, PhotoModelerUAS64_Update201711.exe)
and start PhotoModeler_201711_Activation (Folder ACTIVATION, PhotoModeler_201711_Activation.exe)

2. After Activation, Start Program, click on Options, and License Management, and select Manual/Offline.
Enter the Activation and Registration codes provided.

Win64 only ! Does not Activate 32 bit Version. Do not update ! If you update then Activation will no longer work.

Activation changes the Machine Code ID to make the code work on any Computer. Bypassed the Activation and Machine Code at first,
but later decided to change it. The Maintenance agreement is good to November 30 2017 for free updates, but the program works forever.

Activation allows change of Machine ID to any Machine ID with matching Activation code. To use a different Activation code, and Machine ID
you need to create a text config file, and place it in the Folder with Activation setup: see Read Me.txt for details.

The Machine Code must match the Activation code, and Registration code for it to work.
The Activation code must be created after September 23, 2017 which is the date PhotoModeler update setup was Created and Released.
Thanks to figgler for providing the Activation codes. You must first install Activation to change the Machine ID for the codes to work.

Tested by setting date ahead to 2019 with Internet disconnected, setup took a long time, before giving up checking for updates, but installed ok.
Program, and Activation worked with the date set ahead. Noticed program fails to startup sometimes, and need to click on icon 2, or 3 times.
Haven't fully tested the program, and leaving testing up to members. Now everyone can test PhotoModeler. Please post test results.

If you like the program then consider buying it to help support development.
免责申明:
本站仅提供学习的平台,所有资料均来自于网络,版权归原创者所有!本站不提供任何保证,并不承担任何法律责任,如果对您的版权或者利益造成损害,请提供相应的资质证明,我们将于3个工作日内予以删除。